Slow Release • 100% Soluble Liquid Concentrate
GUARANTEED ANALYSIS
Total Nitrogen (N) 6.0%
1.50% Ammoniacal Nitrogen
3.00% Urea Nitrogen
1.50% Slowly Available Water Soluble Nitrogen*
Available Phosphate (P2O5) 12.0%
Soluble Potash (K2O) 12.0%
Iron (Fe) 0.10%
0.10% Chelated Iron (Fe)
Manganese (Mn) 0.05%
0.05% Chelated Manganese (Mn)
Zinc (Zn) 0.05%
0.05% Chelated Zinc (Zn)
DERIVED FROM: Urea Triazone, Urea, Potassium Carbonate, Ammonium Phosphate, Iron EDTA, Manganese EDTA, Zinc EDTA
*1.5% Slowly Available Nitrogen from Urea-Triazone
2 x 2.5 GAL JUG/CASE: NET WT. 52.5 LB.
30 GALLON DRUM, 250 GALLON TOTE
KEEP FROM FREEZING
A specialty fertilizer blended specifically for application on trees and ornamentals in the practice of professional arboriculture.
A true concentrated liquid for easy mixing & application. For root injection, soil drench, or foliar spray application. This solution has a low salt index and is compatible with fungicides & pesticides.
MIXING RATES
1.25 gallons (1/2 jug) 100 gallons
2.5 gallons (1 jug) 200 gallons
5 gallons (2 jugs) 400 gallons
APPLICATION RATES
90% of feeder roots are in the top 12 inches of soil with the majority in the first 6 inches. Start your application approximately 2 to 4 feet from the root flare and extend to beyond the drip line. The soil should be inoculated with a root probe going 4 to 6 inches deep from a power rig set at approximately 150 to 200 PSI, depending upon the porosity or density of the soil. The root area of the tree should be injected in a grid or in concentric circles spacing 3 feet apart. Inject approximately ½ gallon of solution per injection site. Based on the 3 feet spacing this should put around 150 gallons over 2,000 sq. ft. Site and soil conditions vary, so adjust your application accordingly. Shake before using.
TRUNK RATE OF APPLICATION
Apply the solution at a rate of 5 gallons per inch of trunk diameter.